Automatic group installation of technical parameters and manual saving data

One way exhaust valve is the name of the one-way exhaust, which excludes the air in the bag and completely insulates the air from the bag. To achieve such a good sealing effect, the process of the product itself demands the equipment. 1. Precision of transparent membrane point oil. 2. No burr can be found around the cutting film. 3. The hot pressure position of filter paper should be accurate. (the above 3 points are not sure, which will affect the seal of the valve body so that the whole product cannot be used.) 4. Detect the air tightness of the product, and have automatic resolution of the defective products. 

This time, the customer is not very high in the accuracy of the point oil. Before, we made the exhaust valve assembly of the Japanese enterprises, and the oil requirement was 4 mg/t and 0.5, so this equipment is more familiar with the car. 

The technical parameters of automatic control of exhaust valve and manual saving data 

The process of the exhaust valve assembly is: 1. Automatic feeding. 2. Automatic oil. 3. Automatic cutting film. 4. Assembly of pressure sheet. 5. Detect defective products and automatically lower the material. The customer site needs five people to complete the assembly, and the equipment is only required to operate the equipment after the equipment is put into production, and it can save up to six labor. 

In this way, the customer is a purchase of 2 devices, but can be used as 4 machines, which is a good deal 

The automatic assembly of exhaust valve has the advantages of precise oil, no burr, uniform pressure, uniform indentation and high production efficiency. Welcome the vast majority of customers to purchase!