Fully automatic assembly machine features

Automatic assembly machine, the device speed, high precision, attack out of the teeth can be detected through the teeth. Can be used for high-speed continuous operation, special motor can be durable, can be automated, tooth-type automatic tapping machine can operate multiple devices at the same time, can significantly save labor costs! The

Fully automatic assembly machine features

As shown in Figure 1, the working principle: forward rotation - reverse rotation - forward rotation - reverse rotation and forward rotation --- --- reverse rotation of the one-way cycle with a specific key switch to operate, you can also install Foot switch, the selective operation, continuous, one-way, the cycle can be automatically. Operator hands can leave the machine, to achieve automatic work, beginners can also be smooth operation.

2, automatic tapping machine High precision tapping stroke adjustment is simple, automatic reversing device can freely adjust the tapping stroke, shallow holes and perforated low-processing parts can also be easily adjusted, double safety device to prevent damage to the screw, the spindle Rotate and up and down, advance and retreat knife special double safety clutch, the spindle can automatically stop, reverse the knife will not damage the tool.

3, the teeth from the A, B gear with A, B shaft and the spindle according to the distance from the complete propulsion, vertical stability, precision, precision is particularly high, the screw tapping forward and backward do not have to work can be free. While at the same time determined by the excellent processing of goods, will not cause the thickness of different threads, for thin and light metal, synthetic resin and other soft products can also attack the perfect thread. At the same time can also be configured multi-axis multi-axis synchronous processing, production efficiency greatly improved.

Pneumatic tapping machine with compressed air drive, safe and fast and efficient; less gas pressure and gas volume (0.3-0.8mpa), large torque output; to a variety of steel, iron, copper, aluminum, plastic and other materials tapping; Overload protection device, wire damage less damage, high precision screw; simple and lightweight operation, no need for experience and strength; milling machine with tapping or manual tapping much lower; heavier work does not require positioning device or mobile, Working area is large; positioning fast and high cutting speed, increase production